View Direct Energy's Offers in Your Area
Canada
USAEnter Your Postal Code
Enter Your Postal Code
The device status in the App seems to be out of sync with the actual device status. What should I do?
There are times when the status of the active devices on the App can be out of sync with their actual status because the App does not automatically get the update. To retrieve the latest status, go to "Devices" or "Individual Bulbs," drag your finger down the screen until you see "Release to refresh..." appear on the screen, and then remove your finger from the screen. This will help synchronize the active device list and device status between the App and the server. The device list and individual bulb list also have auto refreshing mechanism built-in and update the device status every 10 seconds.
Sengled Connected Home Lighting Kit FAQs
How should I reset the hub?
Press and hold the white round button on the side of the hub for a minimum of eight seconds and then release it. After a few seconds, the middle blue signal indicator light on the front of the hub should light up in a few seconds...
How should I reset the bulb to factory default?
Power on the bulb, wait for a minimum of 4 seconds, and then power cycle the bulb (turning it off and then back on) quickly for at minimum ten times. The bulb will blink five times indicating pairing mode.
The device status in the App seems to be out of sync with the actual device status. What should I do?
There are times when the status of the active devices on the App can be out of sync with their actual status because the App does not automatically get the update. To retrieve the latest status, go to "Devices" or "Individual...
When adding a new hub in my account, why can't my App find the hub?
To add a new hub via the Element app from your mobile device, please first make sure your hub has been reset prior to a new connection. Then make sure your mobile device is connected to the same 2.4GHz Wi-Fi network that the hub...
What is the recommended distance between bulbs and hub?
Depending on what sits in between a hub and a bulb, the typical working range in an indoor US residential setting is roughly between 50 to 180 feet.
I have occasionally seen Hub Offline when hub is actually powered on. Why would the hub be offline?
This normally happens when hub loses its connection to the router or the Internet connection via the router has been interrupted. This problem should correct itself once the network connection is recovered. Try refreshing the...
How many states does a bulb have in the App?
There are three states that a bulb has as far as App is concerned: On: Online and being turned on. This is indicated in the Individual bulb list with a white bulb icon in orange background. Off: Online and being turned off. This...
When I power off the Element bulb on the wall switch, when can I expect this bulb status change to show up in the App?
When the wall switch turns off a bulb, the bulb will normally show up in the individual bulb list as in "off" state in less than 10 seconds and as "offline" after at least 20 minutes. It takes time for the server to tell apart...
If I use the App to first turn off the bulb, then power off the bulb using the wall switch followed by a quick power on, why does the bulb fail to turn on sometimes?
When you power off the bulb using the wall switch, its capacitor will actually keep the bulb powered on for a short time so it can send the "off" state to the hub and the power in the capacitor will not exhaust until after two...
When I set the dim from 10% to 100% from the main screen, why does the Individual bulbs screen sometime show a value different than 100% if I manually refresh the screen?
When you manually adjust dim from 10% to 100%, it actually triggers a series of dim values updates to be sent to the server in ascending order. The server updates the current dim values as those updates come in one by one. So,...
Can the bulb remember the last dim level?
Yes, the bulb remembers the last dim level. If the last dim level is not 0%, the bulb will remember its last dim level whether it is turned off by the App or by the wall switch. If the last dim level is 0%, the dim level will...
Does wall dimmer interfere with bulb operation?
Sengled Element bulb does not flash when being adjusted by a wall dimmer, unlike many other brands of Zigbee bulbs. However, due to the nature of electric circuit design, many of the following features related to wall switch...
