Power on the bulb, wait for a minimum of 4 seconds, and then power cycle the bulb (turning it off and then back on) quickly for at minimum ten times. The bulb will blink five times indicating pairing mode.
There are times when the status of the active devices on the App can be out of sync with their actual status because the App does not automatically get the update. To retrieve the latest status, go to "Devices" or "Individual...
There are three states that a bulb has as far as App is concerned: On: Online and being turned on. This is indicated in the Individual bulb list with a white bulb icon in orange background. Off: Online and being turned off. This...
When the wall switch turns off a bulb, the bulb will normally show up in the individual bulb list as in "off" state in less than 10 seconds and as "offline" after at least 20 minutes. It takes time for the server to tell apart...
When you power off the bulb using the wall switch, its capacitor will actually keep the bulb powered on for a short time so it can send the "off" state to the hub and the power in the capacitor will not exhaust until after two...
When you manually adjust dim from 10% to 100%, it actually triggers a series of dim values updates to be sent to the server in ascending order. The server updates the current dim values as those updates come in one by one. So,...
Yes, the bulb remembers the last dim level. If the last dim level is not 0%, the bulb will remember its last dim level whether it is turned off by the App or by the wall switch. If the last dim level is 0%, the dim level will...
Sengled Element bulb does not flash when being adjusted by a wall dimmer, unlike many other brands of Zigbee bulbs. However, due to the nature of electric circuit design, many of the following features related to wall switch...